![RAYSHAPE Model Pro official resin bottle | Dentcore [rayshape-resin-bottle-first-v1]](http://dentcore.com/cdn/shop/files/01-model-pro-official-bottle-dentcore.jpg?v=1785874625&width=1946)
Prepare
Select the exact Model Pro shade, printer and layer-height profile. Mix the resin and inspect the tank and build platform before printing.
1
/
of
2
RAYSHAPE
RAYSHAPE Model Pro Dental Model Resin
RAYSHAPE Model Pro Dental Model Resin
Regular price
$60.00 USD
Regular price
Sale price
$60.00 USD
Unit price
/
per
Shipping calculated at checkout.
Couldn't load pickup availability
Product details
RAYSHAPE / Model Pro
Detailed working models
A rigid dental model resin for detailed working models. Grey and Orange are distinct selections; use the matching material profile rather than transferring settings between shades.
Working modelsApplication
Grey / OrangeShade options
Shore D 90Orange TDS value
Use it for the right application
- Application
- Dental working models
- Orange: flexural strength
- 77 MPa
- Orange: hardness
- Shore D 90
- Orange: viscosity
- 150-500 mPa.s at 25 C
- Test scope
- These typical values are from the Orange TDS, tested using Edge E2; not a specification for Grey
How to use Model Pro
Orient and support the part for its geometry, then review the sliced job. Use only the matching printer, material and layer-height profile.
Clean
Remove residual resin using the specified cleaning process. Avoid extending the soak time beyond the material instructions.
Finish
Dry completely and run the approved post-cure cycle. Check margins, dies and mating features before using the model.
The technical sheet below covers Model Pro Orange. Confirm the current Grey instructions separately when ordering that shade.
Before the first print
Exact material profile
Printer, resin name, shade and layer height must match. A 405 nm light source alone does not establish compatibility.
Handling and storage
Follow the bottle label and safety data sheet for protective equipment, storage, mixing and disposal. Keep uncured resin and contaminated wash liquid out of drains.
Validated processing
Do not guess exposure, wash or curing times. Use the material's current instructions and the named curing equipment.
Documents
Technical data sheets describe material properties; use the current instructions for use (IFU) and validated profile for processing settings.
![RAYSHAPE Model Pro official resin bottle | Dentcore [rayshape-resin-bottle-first-v1]](http://dentcore.com/cdn/shop/files/01-model-pro-official-bottle-dentcore.jpg?v=1785874625&width=1445)
