Shining 3D FabWash Post-Processing Wash Station
The first automatic wash station built specifically for the dental 3D printing workflow.
FabWash is a fully automated, multi-stage wash-and-dry system for cleaning 3D-printed dental parts straight off the build platform. Instead of manually swirling parts in tubs of solvent and scrubbing internal channels by hand, you load the platform, close the lid, and let the machine handle part release, washing, and drying in one enclosed cycle. It is designed for dental labs and practices running resin printers day to day โ anywhere consistent, hands-off cleaning matters for surface quality and biocompatibility. By enclosing the solvent and automating every step, FabWash keeps IPA fumes down, keeps results repeatable from case to case, and frees your team from the messiest part of the print workflow.
Why the FabWash stands out
-
Fully automated cycle โ Multi-stage part release, washing, and drying all happen inside one enclosed unit, so there is no manual scrubbing or transferring of wet parts between containers.
-
Magnetic impeller โ Drives thorough solvent circulation that reaches every surface, including the internal channels and undercuts that are hardest to clean by hand.
-
Wi-Fi enabled โ Built-in wireless connectivity delivers over-the-air firmware updates and material library sync, so the station stays current without manual intervention.
-
Pre-programmed resin profiles โ Ships with wash settings optimized for each Shining 3D dental resin, and supports custom profiles for specialty materials you run.
-
Enclosed design โ A sealed chamber minimizes IPA fumes and direct resin contact, making for a cleaner, safer bench and a more comfortable lab environment.
-
Purpose-built for dental โ Unlike general-purpose wash tanks, FabWash was engineered around the dental 3D printing workflow, from part geometry to the resins you actually print.
Specifications
| FabWash Wash Station |
| Max Part Size |
199 x 124 x 180 mm |
| Min Solvent Volume |
3 liters |
| Machine Weight |
15 kg |
| Dimensions |
340 x 303 x 450 mm (750 mm open) |
| Connectivity |
Wi-Fi |
A complete Shining 3D post-processing line
FabWash is the wash stage of Shining 3D's automated post-processing workflow. Pair it with a Shining 3D resin printer such as the AccuFab-F1 for printing and a FabCure post-curing unit for the final cure, and you have a clean print-to-cure pipeline with minimal manual handling between steps.
Official Shining 3D documentation
The manufacturerโs official guide โ full specifications, setup, and safe operation.
Authorized Shining 3D Dealer
Dentcore is an authorized Shining 3D dealer. Full warranty, training, and support included.
Questions about the FabWash? Talk to a Dentcore Shining 3D specialist.
