Graphenano DentalNew
Graphenano G-CAM 98.5 mm Monochroma Milling Disc
Graphenano G-CAM 98.5 mm Monochroma Milling Disc
Couldn't load pickup availability
Product details
Learn more Graphenano DentalG-CAM Monochroma is a 98.5 mm milling disc of PMMA reinforced with medical-grade graphene, made by Graphenano Dental in Spain. It is indicated for permanent and temporary restorations, from single crowns to implant-supported full-arch work, and needs no furnace.
One pure dentine shade through the whole disc. The best base when you characterize with stains or layer.
Specifications
| Diameter | 98.5 mm |
|---|---|
| Mount | Universal |
| Fits | 98.5 mm universal mount for most open CAD/CAM lab mills. |
| Thickness | 14, 16, 18, 20, 22, 24, 26 and 30 mm |
| Format | Monochroma |
| Shades | A1, A2, A3, A3.5, B1, B2, BL1, BL2, C2 and TR (transparent) (VITA classical) |
| Units per disc | About 28 on average (manufacturer) |
| Regulatory | FDA 510(k) cleared, K220329. CE marked. ISO 13485 |
Indications
- Single crowns, anterior and posterior
- Bridges on natural teeth
- Implant-supported bridges and full-arch
- Full and partial dentures, implant overdentures
- Inlays, onlays and veneers
- Copings and substructures
Material data
| Material | PMMA reinforced with medical-grade graphene |
|---|---|
| Flexural strength | 140 MPa ยฑ7% (ISO 20795-1) |
| Elastic modulus | 3,200 MPa ยฑ7% (ISO 20795-1) |
| Compressive strength | 155 ยฑ5 MPa (ISO 5833) |
| Surface hardness | 88 Shore D; 19.5 KHN |
| Water absorption | 4 ยตg/mmยณ |
| Solubility | 0.5 ยตg/mmยณ |
| Residual monomer | <0.004% |
| Furnace | None. No sintering or crystallization |
Workflow
- Scan intraorally or from a model.
- Design with the G-CAM design parameters.
- Mill with your mill's PMMA strategy, wet or dry. Never force or modify a disc to fit a holder.
- Separate, remove connectors and adjust.
- Characterize with light-curing stains if needed; finish with G-TOOLS Laboratory.
- Sandblast, clean and cement with a dual-cure resin cement.
Questions
Will it fit my mill?
The 98.5 mm universal mount fits most open CAD/CAM mills. Zirkonzahn users need the 95 mm disc. Not sure? Call (844) 292-8023 with your mill model.
Monochroma or Multichroma?
Multichroma looks natural straight from the mill. Monochroma is one even shade, better if you characterize; transparent (TR) is Monochroma only.
Is it for permanent or temporary work?
Both. G-CAM is indicated for permanent and temporary restorations and is FDA 510(k) cleared (K220329).
Do I need a furnace?
No. G-CAM is milled and finished mechanically, with no sintering or crystallization step.
What are the design minimums?
Crowns 0.4 mm at the margin and 0.6 mm occlusal; veneers at least 0.3 mm; connectors at least 9 mmยฒ anterior and 13 mmยฒ posterior; cantilevers up to 11 mm with a load check. Full tables are in the design parameters document below.
How do I cement it?
Sandblast the intaglio with aluminium oxide, clean with alcohol and dry, then use a dual-cure resin cement following that cement's instructions.
How do I choose a shade?
Shades follow VITA classical. Use the physical G-CAM Shade Guide; colors on a screen are not accurate.
Documents
G-CAM work process (milling, finishing, cementation)
G-CAM design guide, illustrated
Stock and shipping
Call (844) 292-8023 and we will confirm stock and delivery for your size and shade.
