Permanent crowns and bridges, printed in 9 VITA shades.
dx finest crown is a Class IIa medical device for 3D printing permanent single crowns, up to 3-unit bridges, inlays, onlays, veneers, and denture teeth. It delivers flexural strength above 100 MPa and a Barcol hardness above 50, matching the mechanical demands of permanent posterior restorations. Available in 9 VITA classical shades (A1, A2, A3, A3.5, B1, B3, BL, C2, D3) in 500g and 1,000g bottles. MMA-free and biocompatible per ISO 10993-1. Made in Germany.
SPECIFICATIONS
| Wavelength |
385 nm |
| Flexural strength |
> 100 MPa (ISO 10477) |
| Flexural modulus |
> 2,800 MPa (ISO 10477) |
| Hardness |
> 50 Barcol |
| Water absorption |
< 40 µg/mm³ |
| Solubility |
< 7.5 µg/mm³ |
| Layer thickness |
50 µm |
| Biocompatibility |
ISO 10993-1 fulfilled |
| Shades |
A1, A2, A3, A3.5, B1, B3, BL, C2, D3 |
Post-cure protocol
Otoflash G171: 2x2,000 flashes under nitrogen (~6 min), rotate parts halfway. PrograPrint Cure: 405 nm at 45% for 5 min + 460 nm at 45% for 5 min. Dreve PCU LED N2: 40% intensity, 6:40 min with vacuum + nitrogen. Allow 30 min at room temperature after cleaning before post-cure. Processing temp: 23°C ± 2°C.
Downloads
Workflow Guide
IFU (USA)
Brochure
Printer Annex
DoC
View all DETAX resins
Dentcore is an authorized DETAX dealer. All products ship from our US warehouse with full manufacturer backing. Questions? Call 844-292-8023.
