Best 3D Print Resins for Dental Labs in 2026

Choose dental 3D printing resin by the part you need to produce: a restoration, splint, laboratory model, surgical guide, denture base or casting pattern. Then check the exact material against the printer profile and finishing equipment you use.

For a lab buying across brands, the useful comparison is the complete workflow. A shade, a strength figure or a shared printer wavelength answers only part of that question. The examples below separate material roles and the purchasing details that are easy to confuse.

Crown and bridge resins: check the indication first

DETAX Freeprint Crown has nine shades: A1, A2, A3, A3.5, B1, B3, BL, C2 and D3. A3.5 is part of the range, so the older eight-shade comparison misses an option.

Its US instructions distinguish permanent single crowns and other listed restorations from long-term provisional bridges of up to three units. For a bridge case, confirm the indication and design requirements before choosing the material.

DETAX Freeprint Temp is the temporary-restoration option. Its US instructions specify an intraoral duration of less than 30 days. The Crown and Temp names refer to different materials with different instructions; select for the planned restoration and wearing period.

Graphy TC-80DP is another crown-and-bridge material with a separate processing manual. The Graphy material and equipment comparison explains its place alongside Graphy's other resins. Use the individual instructions when comparing print and post-cure workflows across brands.

Splint and night guard resins: compare rigidity and finishing

KeySplint Hard is the rigid splint option in Keystone's range. KeySplint Soft Clear belongs to the more flexible Soft range. Start with the prescribed appliance and required rigidity, then choose the material variant.

Keystone requires a validated printing workflow and specifies post-curing equipment and settings. Check the selected resin in that workflow, including its washing and curing instructions. Printer wavelength alone does not establish that the complete process has been validated.

For the differences between material and color names, read KeySplint Hard vs Soft, Purple and Clear.

Model resins: match the model to the job

Asiga DentaMODEL is listed by Asiga in Almond (light beige). It is used for dental models, including crown-and-bridge and implant models. The color entry is specific to DentaMODEL; other Asiga model materials have their own names and colors.

Decide how the model will be used before comparing bottles. A model for reviewing margins, a model receiving analogs and a model used for thermoforming place different demands on the finished part. Match the intended use to the material documentation and check the relevant fit and handling steps in your own production workflow.

Surgical guide resins: include the full processing instructions

Asiga DentaGUIDE is a material for surgical guides. Asiga lists it for 385 nm printers. Use the current instructions for printing, cleaning, curing and sterilization.

A surgical-guide purchase also needs the equipment and procedure used after printing. Record the exact cure unit and the applicable sterilization instructions with the material selection, so the workflow is ready before the first clinical case.

Denture base resins: plan the base and teeth together

Graphy THD is a hard denture base material. Graphy TFDH is a separate flexible denture material; TC-80DP belongs to the crown-and-bridge range.

For a denture workflow, identify the base material, tooth material and bonding procedure together. Each step needs the applicable instructions. The Graphy comparison also separates the roles of printing materials and post-processing equipment.

Castable and specialty resins: name the finished part

Asiga DentaCAST is used for printed patterns in casting and pressing workflows. Include the investment and burnout process when selecting a pattern material.

For specialty work, specify whether the printed part is a pattern, a gingiva mask, a try-in or the final appliance. That description helps narrow the material category before you compare pack sizes and equipment requirements.

A practical resin purchasing checklist

• Write down the part, its intended use and any required wearing period.
• Choose the exact resin name, shade and bottle size.
• Match the material to your printer model and current material profile.
• Check the washing, drying and curing instructions against the equipment in your lab.
• Include any separate bonding, sterilization, investment or burnout step required by the workflow.

Keep the resin name and instruction version with the job setup. When changing material or equipment, review the affected steps before repeating an old process. This makes the purchase decision specific enough to compare useful alternatives across brands.

Related Dentcore guides

• Compare Asiga dental 3D printers
• Plan the full cost of a dental 3D printing workflow

For reference only. Specifications, pricing, and availability are as of the publication date and may change without notice. Dentcore is not responsible for discrepancies. Always verify with the manufacturer before purchasing.