Compact, all-in-one design
Printer and curing workflow in a small clinical footprint.
Now available for pre-order
Ceramix-Nano capsule 3D printer
A compact dental 3D printer with integrated curing, capsule material handling, and AI-assisted workflow planning for same-day permanent ceramic restorations.
All-in-one micro lab
Small enough for the operatory, focused enough for the restoration
Ceramix-Nano brings the essential chairside steps into one tight workflow: design, capsule material handling, printing, built-in curing, and final surface planning.
Portable power support
Supports compatible high-output power banks for mobile planning.
Permanent restorations
Designed around crowns, veneers, inlays, onlays, and up to 3-unit bridges.
Minimal learning curve
A guided appliance-style workflow for chairside adoption.
APS printing technology
Adaptive pneumatic layer separation for ceramic-filled capsule resin.
Seamless digital workflow
Connect scanning, AI design, nesting, slicing, print, and cure.
15 min
total chairside fabrication target for a single crown workflow
8-11 min
typical printing window for common crown cases
3 min
built-in on-machine curing cycle
38 mm
capsule chamber bridge capability
Chairside ceramic workflow
From intraoral scan to permanent crown planning
Ceramix-Nano is built around a connected workflow: scan the preparation, generate an AI-assisted design, load a LumiCera capsule, print the restoration, and finish through the integrated curing path.
Pre-order package
Everything needed to start planning, in one box
The launch package is organized around the printer, A2 starter material, device coverage, and an initial AI crown design allocation for Dental Cloud workflow setup.
Ceramix-Nano printer
Ultra-compact appliance for focused chairside restoration printing.
A2 LumiCera starter box
The printer package includes one box of A2 LumiCera capsules.
One-year hardware warranty
Standard one-year hardware warranty is included with the printer.
50 AI Crown Designs
Included designs are redeemed on Shining 3D Dental Cloud using the device serial number and expire six months after activation.
Printer workflow
APS speed, built-in curing, and a smaller clinical footprint
Ceramix-Nano is built as a chairside fabrication unit rather than a general-purpose resin printer. The workflow centers on ceramic-filled capsule resin, adaptive pneumatic printing, and an integrated curing chamber inside a compact appliance-style system.
Patented APS technologyAdaptive Pneumatic Stereolithography monitors and controls layer separation for high-viscosity ceramic-filled resin.
Integrated professional curingThe printer combines high-precision printing with an 80C curing module in the same compact device.
Compact clinical footprintAt about 4.5 lb / 2 kg, the system is designed for operatories and small chairside work areas.
Power-bank compatibleCompatible high-output power banks can support mobile printing setups when the workflow requires flexibility.
Built-in curing
Print and cure without moving through a full lab stack
The on-machine curing path keeps the chairside workflow compact and helps reduce the number of separate devices needed for routine planning.
Connected appliance
Designed for a clearer daily routine
Touchscreen operation, capsule loading, and cloud-connected print delivery keep the workflow easy to explain and easier to train.
LumiCera capsule resin
Ceramic-filled capsule material
LumiCera is the ceramic resin inside the Ceramix-Nano capsule: pre-measured, ready to print, and designed to support a cleaner chairside workflow for common permanent restoration cases.
BLA1A2B1C2
Five VITA shadesBL, A1, A2, B1, and C2 cover common starter shade planning.
Up to 3 crowns per capsuleCapsule yield depends on restoration size and nesting.
Up to 3-unit bridgesThe capsule chamber supports bridge planning up to 38 mm.
Cleaner material routineCapsule handling reduces the open-resin steps typical of bottle workflows.
SHINING 3D AI Design x Ceramix-Nano
Seamless design for same-day restorations
AI Design connects order management, crown design, nesting, slicing, and one-click print delivery so the Ceramix-Nano workflow can move from scan data to fabrication without platform switching.
Order ManagementSelect patient cases directly from the cloud platform to begin AI-assisted crown design.
AI DesignComplete design and refinement through a web-based workflow with review controls.
Intelligent Nesting & SlicingThe cloud arranges and prepares restorations for printing with less manual setup.
One-Click PrintingOnce the design is confirmed, Ceramix-Nano receives the print file automatically.
AI-powered design in 90 secondsDesigned for fast chairside crown design review and refinement.
Anatomy-driven tooth designDesigns can be checked and refined before production.
Credit packagesDentcore has 50, 500, and 1000 unit Design Service Credit products staged for launch planning.
Pre-order now available
Start with the printer, then plan resin, AI credits, and add-ons with Dentcore.
Pre-order Ceramix-Nano
Add-ons and planning items
Quote the workflow, not only the machine
Aesthetic curing kit
Optional add-on for oxygen-free stain and glaze finishing when a smoother aesthetic surface finish is part of the workflow. Gas cartridge may be shown in source imagery but is not included.
Optional two-year extended warranty
Prepared as a launch quote add-on pending final customer-facing policy.
Self-guided training
Prepared as an optional training line item for launch planning.
Design Service Credits
Credit packages are staged in 50, 500, and 1000 unit options for Shining 3D Dental Cloud workflows.
Technical specifications
Built for a compact chairside workflow
Ceramix-Nano combines a small-footprint printer, capsule-based material handling, and built-in curing for focused dental ceramic restorations.
Optical engineDLP
Light wavelength400-410 nm
XY resolution50 um
Typical cycle time8-11 min print
Device size3.43 x 5.16 x 10.87 in
LevelingCalibration-free auto-leveling
Curing wavelength360-385 nm
Curing time≤3 min
Max curing temperature176F / 80C
ApplicationsCrown, bridge, veneer, inlay, onlay
Document library
Product resources
Download the brochure, setup guide, and IFU documents for printer workflow, LumiCera handling, installation planning, and maintenance reference.
Ceramix-Nano BrochurePrinter workflow, specs, AI design, and material overview
LumiCera CB200 BrochureCapsule resin family and material positioning
Quick Start GuideSetup reference for installation planning
Ceramix-Nano IFUDevice operation, maintenance, and safety details
LumiCera IFUMaterial handling, processing, storage, and indications
Frequently asked questions
Key questions before adding Ceramix-Nano to the workflow
Can the capsule be reused?
No. The LumiCera capsule is designed for single use.
What are the power bank requirements?
A compatible 20V / 5A / 100W power bank is required for power-bank supported operation.
How do I achieve the best possible surface finish?
An optional inert gas aesthetic curing module is available for oxygen-free finishing when a smoother, more aesthetic surface is part of the workflow.
Does Ceramix-Nano require manual leveling?
Ceramix-Nano supports automatic leveling before each print.
Authorized Dentcore support
Need help deciding if Ceramix-Nano fits your workflow?
Our team can help review printer setup, add-ons, resin shade planning, design credit needs, and training path before pre-order.