NEW ARRIVAL

VHF E3

3+1
Axes

Occlusal
appliances

Aligners
< 60 sec.

Dry

Mill

Software
incl.

OUR SPECIALIST FOR THE
PROCESSING OF OCCLUSAL APPLIANCES

Expect the very best results in the shortest time with no arduous reworking
E3
AUTOMATE YOUR WORKFLOW
OUR IN-HOUSE DEVELOPED TRIMCAM SOFTWARE AUTOMATICALLY RECOGNIZES THE TRIMLINE ON WHICH THE OCCLUSAL APPLIANCE IS MILLED OUT FROM THE AVAILABLE PLANNING DATA.
FOR MORE COMFORT
IN ALIGNER AND SPLIT

With a machine weight of only 55lbs and no use of compressed air, the compact E3 offers maximum flexibility in terms of the installation site. Meticulous attention has been paid to the details: for example, no separate extraction system is required.

100% developed and manufactured in Germany, the E3 impresses with its precise results and outstanding reliability – not only for aligners, but also for bite splints, grinding splints and other splints, including sports mouthguards. Despite its compact design, the interior of this machine contains only high-quality industrial components.

MATERIAL INDICATION
SAVE TIME AND WORK
Benefit from the machining of aligners in under 60 seconds. This saves you a lot of time compared to manual production in addition to gaining the high precision of CNC production.
TECHNICAL DATA

General

Fields of application Dry machining
Materials Thermo-formed plastic foil
Indications Aligners and other splints
Holder systems Holder for tool-free clipping in of the aligners

Basic System

Construction Sturdy aluminum structure
Housing White high-gloss lacquer finish upward opening lift door to the workroom
Number of axes 3+1
Linear axes X-/Y-/Z-axis X-axis: rack and pinion drive – Y-/Z-axis: trapezoidal screw spindles motor resolution 10 μm max. axial backlash 0.06 mm
Rotary axis B-axis Rotation angle: 360°, infinite
Control unit Control electronics with continuous path progression and dynamic pre-calculation hardware-based real-time operating system with standardized instruction set – FPGA-integrated processor updateable hardware real-time path and ramp calculation via dedicated hardware engines in the FPGA- four-quadrant control of the motors for particularly smooth run ning multiple digital I/Os for controlling the peripherals integrated inverter for synchronous and asynchronous motors, electronic gate detection – Ethernet and USB interface
Lighting RGB LED lighting with status indication

Spindle

General High-frequency spindle with mechanical tool change
Speed Up to 60,000 RPM
Power Peak power (P): 800 watts continuous power (S1): 450 watts
Bearing 2-fold hybrid ceramic ball bearing
Collet Collet type ER8 for tools with 3 mm shank diameter

Processing Mode

Dry Compressed air-free operation without suction

CONNECTION REQUIREMENTS

Compressed air
Power supply 100-240 volts – 50/60 Hz, 320 watts
Extraction System
Data 10/100/1000 MBit/s BaseT port (auto-sensing) Ethernet via RJ-45 socket

ENVIRONMENTAL CONDITIONS

Operating temperature Between 10 °C and 35 °C
Air moisture max. 80 % (relative), non-condensing

APPROVALS

All models CE
North America model UL 61010-1, CAN/CSA C22.2 No. 61010-1

DIMENSIONS & WEIGHTS

Dimensions (W/D/H) 360 × 370 × 490 mm with closed door · 360 × 420 × 490 mm with open door
Footprint (W/D) 286 × 268 mm
Weight 25 kg

SCOPE OF DELIVERY

CAM Software TRIMCAM software for aligner production included in the scope of delivery
Accessories Calibration set incl. stirrup measuring screw · Torx driver · torque driver 1.5 Nm · cleaning brush · cleaning scrubber and microfiber cloth · radius cutter (2pcs.) · clamping wrench · open-end wrench · power cable · Ethernet network cable

Subject to changes and errors.