Beta v2.1.0 Review Credits to Medit This software’s future looks so bright with all these updates and new features. Medit’s developers work hard to provide and respond to the wants of the current users, making this one of the most improved software that comes with an intraoral scanner. Let’s go over the major features of this Beta that I thought was worth highlighting. The Dashboard Initial reaction for the Dashboard, it is statistics galore. I personally love the “Total Statistics” section where it shows the total amount of time is shown for that specific scanner, the number of orders that are completed or cancelled. If you had set up the Payment System, you can see the total amount for the cases you sent to the labs. Printing the Order Form Printing the order form for clinic records is now available! This was another feature that was very [...]

Hello! Properly sterilizing your intra oral scanner is an important step in preventing clinical contamination. After treatment, clean and disinfect all other surfaces of the handpiece except for the front of the scanner (optical window) as well as the end (air vent hole). Make sure the device is switched off before cleaning and disinfecting. Use the device only after it is completely dry. Recommended disinfection solution: - Denatured alcohol (eg. ethyl alcohol or ethanol) – typically 60-70% Alc/Vol. The general cleaning and disinfecting procedure are as follows: - Switch off the device using the power button. - Unplug all cables from the power hub. - Attach the handpiece cover to the front of the scanner. - Apply the disinfection solution to a soft lint-free, non-abrasive cloth. - Wipe the scanner surface with a cloth which has been dampened with disinfectant. - Remove liquid with a clean, lint-free, dry, non-abrasive [...]

  We have exciting news for our exocad DentalCAD users – exocad has launched their new exocad Refresh Program. This new amazing program allows dentalCAD users to update their licenses with only one year’s worth of annual fee + fixed fee; regardless of how many years the license has been expired. The fact that the exocad DentalCAD Perpetual licenses can be updated per user’s preference – and is not a mandatory requirement, is one of exocad’s most unique and attractive features. With this new program, exocad is now even more flexible, as updating old licenses is more affordable than ever. Details exocad DentalCAD licenses update will cost: one-year annual fee for the core version & all modules + $1800 fixed fee. If the license has been expired for only one year, the refresh fee of $1800 will still be charged along with the one-year update fee. However, end users are [...]

Medit Link: New features: Visual levels of Connectivity Post-scan progress indicator Case Sharing Percentage of processing Improvements: The latency time when navigating Medit Link Minor Tweaks: Deeper Colors “Scan box” to “Case Box” Left sidebar collapse iScan: New features: The option for a pre-op scan High Resolution toggle for partials Filtering levels Scan Replay Option to have a fixed point of view when scanning Impression scan mode Improvements: Improved scanning algorithm Improved processing times Improved Optimization process times in between arches Improved rendering Hello! My name is Luke and I am the clinical tech specialist at Dentcore. I wanted to share my experiences testing the new beta version to shed light on what might come in the near future. Medit has always been very good at talking to the masses about what is wanted and what can be improved by directly asking them [...]

PLEASE NOTE: As of 03/29/19, due to Medit offering their own extended warranty, DentCore's Total Protection Extended Warranty will be DISCONTINUED. Please see following link for details on currently active warranty information: https://dentcore.com/i500-manufacturers-warranty/ Following information details the terms and conditions of the DentCore Medit i500 Total Protection Extended Warranty Program (“Extended Warranty”): Coverage Terms: Coexistence with Manufacturer’s Limited Warranty. The Extended Warranty will coexist with the Manufacturer’s Limited Warranty, during the time both warranties are in effect. If during that time a warranty claim is made, then Manufacturer’s Limited Warranty shall be the primary source of warranty. If Manufacturer’s Limited Warranty does not provide coverage for the claim, then the Extended Warranty shall provide coverage, according to the terms set on this document. Medit i500’s Manufacturer’s Limited Warranty lasts for one year after the Customer Acceptance Protocol Agreement signature date. If a signed Acceptance Protocol does not exist [...]

EnvisionTEC’s E-Dent 400 printing material for the Perfactory family of 3D printers is a biocompatible Class IIa and FDA-approved solution for the accurate 3D printing of crowns and bridges for long-term temporary use. E-Dent 400 can also be used for the 3D printing of very tough veneers that are extremely accurate and have a very fine surface finish. Full crowns or multi-unit bridges can be printed and the printed designs can also be cut back to allow for color layering and shading. Availability of 3D printable PMMA material for the dental clinical use is a giant step for dental CAD/CAM applications. Temporization is an intrinsic part of dentistry, as dental prosthetics must be personalized for each patient and final restorations takes days or weeks to fabricate. 3D printing technology bypasses all manufacturing hardships that milling technology has endured; there are no undercut limitations, minimum manufacturing space, noise, and [...]

E-Guide Rigid PU is strong, flexible material with smooth finish. Originally designed for industrial prototyping applications, DentCore tested it for dental diagnostic wax-up application with resounding success. Due to the high accuracy of the EnvisionTEC build styles, fitting and margin quality is excellent. The greatest advantage of the E-Rigid PU over milling wax discs is the reduced amount of finishing time. The nature of DLP 3D printing technology prevents all undercuts from forming, which creates accurate finish on the lingual surface. Embrasures are smoothly formed, as opposed to milling, where the burs would often leave irregularities. Sprues are much smaller and easier to remove. Finally, the surface finish is smooth and doesn’t need additional handling. CAD/CAM has so much potential as technology continuously evolves. You never know where you may find new applications! https://envisiontec.com/3d-printing-materials/micro-materials/e-rigid-pu/